The Microcor Data Logger is a corrosion/erosion monitor ideal for remote locations where the direct online operation is not possible. With its new extended 5-year battery life, the MDL now ensures years, not months of uninterrupted operation.
When unexpected corrosion problems arise, the MDL is a quick and cost-effective solution. In a matter of minutes, the MDL can be easily configured and installed, with no power or communication wiring required.
Data download is simple and quick with a Checkmate™ DL in hazardous areas or on a laptop if located in a safe area. Cosasco Data Offline software allows for easy data storage and graphical analysis of the results, showing metal loss and corrosion/erosion rate.
- Stand-Alone Data Logger
- Improved Battery Life
- Autonomous Data Collection of Corrosion/Erosion Data
- Hazardous Area Certified
- Downloads with Checkmate™ DL
The newly redesigned Microcor Data Logger MWT-3905-MDL (MDL) is the next generation in remote corrosion monitoring data loggers, featuring an all-in-one design, lower cost, and extended battery life.
- High Sensitivity Corrosion/Erosion Data
Microcor’s increased speed of response gives accurate corrosion/erosion rates almost immediately allowing direct correlation with other process parameters. Corrosion and erosion problems can be identified quickly allowing the user to take immediate preventative action.
- Enhanced Battery Life
With its new extended 5-year battery life, the MDL now ensures years, not months of uninterrupted operation. Battery replacement costs are reduced and unexpected data loss from power failure is avoided.
- Quick and Easy Installation
When unexpected corrosion problems arise, the MDL is a quick and cost-effective solution. In a matter of minutes, the MDL can be easily configured and installed, with no power or communication wiring required!
- Cost-Effective Remote Data Collection
With its compact all-in-one design, the MDL is less cost per monitoring point than its predecessor. The self-powered MDL has low start-up costs and virtually no maintenance costs. With no power and communication infrastructure required, the MDL is a low-cost option for remote locations.
With the new Microcor MWT-3905-MDL you are able to make rapid, accurate corrosion rate measurements in any process environment — in conductive or non-conductive liquids, brines, or gases, single or multiphase flows in the following applications:
- Gas plants
- Offshore platforms
- Chemical and Petrochemical Plants
- Water and Wastewater Plants
Learn more about Microcor.