Microcor MWT-3905-MDL Corrosion/Erosion Data Logger Data Sheet
Microcor MWT-3905-MDL User Manual
Microcor MWT-3905-MDL Quickstart Guide
- Stand-Alone Data Logger
- Improved Battery Life
- Autonomous Data Collection of Corrosion/Erosion Data
- Hazardous Area Certified
- Downloads with Checkmate™ DL
The newly redesigned Microcor Data Logger MWT-3905-MDL (MDL) is the next generation in remote corrosion monitoring data Loggers, featuring an all-in-one design, lower cost, and extended battery life.
High Sensitivity Corrosion/Erosion Data
Microcor’s increased speed of response gives accurate corrosion/erosion rates almost immediately allowing direct correlation with other process parameters. Corrosion and erosion problems can be identified quickly allowing the user to take immediate preventative action.
Enhanced Battery Life
With it’s new extended 5 year battery life*, the MDL now ensures years, not months of uninterrupted operation. Battery replacement costs are reduced and unexpected data loss from power failure is avoided.
Quick and Easy Installation
When unexpected corrosion problems arise, the MDL is a quick and cost effective solution. In a matter of minutes the MDL can be easily configured and installed, no power or communication wiring required!
Cost-Effective Remote Data Collection
With its compact all-in-one design, the MDL is less cost per monitoring point than its predecessor. The self powered MDL has low start-up costs and virtually no maintenance costs. With no power and communication infrastructure required, the MDL is a low cost option for remote locations.
With the new Microcor MWT-3905-MDL you are able to make rapid, accurate corrosion rate measurements in any process
environment — in conductive or non-conductive liquids, brines, or gases, single or multiphase flows in the following applications:
Chemical and Petrochemical Plants
Water and Wastewater Plants