Microcor® MWT-3905-MDL Corrosion/Erosion Data-Logger

The newly redesigned Microcor Data-Logger MWT-3905-MDL (MDL) is the next generation in remote corrosion/erosion monitoring data-loggers, featuring an all-in-one design, lower cost, and improved battery life. With it’s new extended 5 year battery life, the MDL now ensures years, not months of uninterrupted operation. Battery replacement costs are reduced and unexpected data loss from power failure is avoided.

When unexpected corrosion problems arise, the MDL is a quick and cost effective solution. In a matter of minutes the MDL can be easily configured and installed, no power or communication wiring required! With its compact all-in-one design, the MDL is less cost per monitoring point than its predecessor. The self powered MDL has low start-up costs and virtually no maintenance costs. With no power and communication infrastructure required, the MDL is a low cost option for remote locations.

Data download is simple and quick with a Checkmate™ DL in hazardous areas or a laptop if located in a safe area. Microcor Tools PC software allows for easy data storage and graphical analysis of the results, showing metal loss and corrosion/erosion rate. When multiple sites and corrosion monitoring methods are used, Corrdata II total corrosion management software allows the user to graph multiple parameters for direct correlation of data.

Click here for Microcor Data-Logger Product Brochure

For more information about our Microcor Corrosion/Erosion Data-Logger or other corrosion monitoring products,contact Rohrback Cosasco Systems.

Microcor MWT-3905-MDL Data-Logger Data Sheet

Microcor MWT-3905-MDL User Manual

Microcor MWT-3905-MDL Quickstart Guide

The battery powered MWT-3905-MDL Data-Logger provides for an autonomous corrosion/erosion data collection system. The MWT-3905-MDL has the added capability of simplified data collection from the hazardous area with the intrinsically safe Checkmate DL data collector. The communication operates through an intrinsically safe RS 232 port on the data-logger. This avoids the need to remove the data-logger to the safe area under a hot work permit, in order to transfer data to the PC. In non-hazardous areas, the corrosion/erosion data may still be collected directly with a portable PC and connection cable to the data-logger.

Corrosion/Erosion Rate Data-Logger System

Rev-E

Please use the following product selector to assist you in selecting the appropriate product options and instrument model to meet your needs. If you are unsure of a particular option just choose “unknown” from the drop down menu. Please note all length requirements are in “inches”.



Housing

Part Number:

	Quantity:

With the new Microcor MWT-3905-MDL you are able to make rapid, accurate corrosion rate measurements in any process

environment — in conductive or non-conductive liquids, brines, or gases, single or multiphase flows in the following applications:

Gas plants
Refineries
Offshore platforms
FPSOs
Chemical and Petrochemical Plants
Water and Wastewater Plants

The newly redesigned Microcor Data-Logger MWT-3905-MDL (MDL) is the next generation in remote corrosion monitoring data-loggers, featuring an all-in-one design, lower cost, and extended battery life.

High Sensitivity Corrosion/Erosion Data

Microcor’s increased speed of response gives accurate corrosion/erosion rates almost immediately allowing direct correlation with other process parameters. Corrosion and erosion problems can be identified quickly allowing the user to take immediate preventative action.

Enhanced Battery Life

With it’s new extended 5 year battery life*, the MDL now ensures years, not months of uninterrupted operation. Battery replacement costs are reduced and unexpected data loss from power failure is avoided.

Quick and Easy Installation

When unexpected corrosion problems arise, the MDL is a quick and cost effective solution. In a matter of minutes the MDL can be easily configured and installed, no power or communication wiring required!

Cost-Effective Remote Data Collection

With its compact all-in-one design, the MDL is less cost per monitoring point than its predecessor. The self powered MDL has low start-up costs and virtually no maintenance costs. With no power and communication infrastructure required, the MDL is a low cost option for remote locations.