Cosasco® Accessories

Click to enlarge

There are several replacement parts and accessories including, hollow and solid plug assemblies, protective covers, and service equipment and tools, for the Cosasco Two-Inch System.

	Product Name	Product Description
	Access Fitting Body Seat Reamer, 1.625"	For removing rust, product build up, scale, etc. from plug body seat within mounting body. ...
	Diverter Hose 10 Feet (3 Meters)	Used with Retrievers, Service Valves and Surge Tubes for safe and easy dispersion of product or pressure relief. Also is a convenient aid when backpressuring. ...
	Heavy Protective Cover w/Bleed Valve	Heavy Protective Cover w/Bleed Valve 1/2" NTP Hole (4000 PSI max)...
	Heavy Protective Cover w/Bleed Valve Pressure Gauge	Heavy Protective Cover w/Bleed Valve Pressure Gauge 1/2" NTP Hole (4000 PSI max)...
	Hollow Plug Assembly	Hollow Plug Assembly (Nominal height 4.00" (102 mm.), dia. 1.75" (44 mm.))...
	Hollow Plug Body	Hollow Plug Body (film coated to prevent galling) ...
	Hollow Plug Bore Sealing Nut	Hollow Plug Bore Sealing Nut (Seals center of hollow plug. Removed & replaced with probe insert when monitoring) ...
	Hollow Plug Moisture Seal Plug	Permits installation (only) of electronic probe inserts while keeping the contact pins clean and dry. Retriever and Service Valve required in use ...
	Hot Tap Cutter w/Pilot Drill	Provides 100% plug retention...
Lubricant-Synthetic	Lubricant-Synthetic	Gives maximum resistance to washout; best use is in light hydrocarbon liquids; provides superior protection to both metals and seals....
Lubriplate Grease	Lubriplate Grease	A multi-purpose lithium base grease. Usually the best choice of most services since it is thin and applies easily. ...
	O-Ring Primary Seal	O-Ring Primary Seal...
	Overshot Adapter	Permits removal and installation of Hollow Plug probe inserts with a steel pipe plug in place. (Keeps inside of probe area clean and dry). Recommended for use with Microcor, Corrosometer, Corrater and Hydrogen Probe Inserts....
	Packing (Primary Seal)	Packing for Hollow and Solid Plug Assemblies (Primary Seal)...
	Packing (Probe Insert Seal)	Packing for Hollow Plug Assembly (Probe Insert Seal)...
	Pipe Plug for Hollow Plug Assembly	Pipe Plug for Hollow Plug Assembly (Protects hollow center from contaminents until probe is installed) ...
	Pipe Plug for Solid Plug Assembly	Pipe Plug for Solid Plug Assembly...
	Pipe Plug Retriever Adapter	Allows removing or installing the ½” Pipe Plug on the Solid Plug Assembly while under pressure. Retriever and Service Valve required in use. ...
	Protective Cover With Bleed Valve Assembly	The Protective Cover With Bleed Valve Assembly is recommended only for extremely high temperature or highly corrosive situations which may result in a slow teak from damage to packing, o-ring or threads. Provides a temporary secondary seal to the Access F...
	Protective Cover With Hole - Carbon Steel	The Protective Cover With Hole accomodates probe inserts and their adapter/sensorsto permit continuous monitoring and automatic read-out instruments....

Displaying 1 to 20 (of 32 products)

Result Pages: 1 2 [Next >>]