Cosasco® Accessories

Click to enlarge

There are several replacement parts and accessories including, hollow and solid plug assemblies, protective covers, and service equipment and tools, for the Cosasco Two-Inch System.

	Product Name	Product Description
	Set Screw	Set Screw for Hollow and Solid Plug Assembly - 2 required (Locks hollow plug nut to body & locks hollow plug bore sealing nut or probe insert to hollow plug nut) ...
	Thread Tap Assembly	For repair of damaged threads in the access fitting body. ...
	Packing (Probe Insert Seal)	Packing for Hollow Plug Assembly (Probe Insert Seal)...
	Thread Die Assembly	For repair of damaged threads on the Solid / Hollow Plug body....
	Pipe Plug for Hollow Plug Assembly	Pipe Plug for Hollow Plug Assembly (Protects hollow center from contaminents until probe is installed) ...
	Pipe Plug Retriever Adapter	Allows removing or installing the ½” Pipe Plug on the Solid Plug Assembly while under pressure. Retriever and Service Valve required in use. ...
	Solid Plug Assembly	Solid Plug Assembly (nominal height 4.00" (102 mm.), Dia. 1.75" (44mm.)...
Thread Brush	Thread Brush	For cleaning chips or debris from the access fitting ID threads. ...
	Solid Plug Body	Solid Plug Body (film coated to prevent galling) ...
	Access Fitting Body Seat Reamer, 1.625"	For removing rust, product build up, scale, etc. from plug body seat within mounting body. ...
	Solid Plug Nut	Solid Plug Nut (replaced with corrosion-device nut while monitoring. Either nut acts as retainer for primary packing.) ...
	Overshot Adapter	Permits removal and installation of Hollow Plug probe inserts with a steel pipe plug in place. (Keeps inside of probe area clean and dry). Recommended for use with Microcor, Corrosometer, Corrater and Hydrogen Probe Inserts....
	O-Ring Primary Seal	O-Ring Primary Seal...
Tool Kit	Tool Kit	Well stocked tool box, containing more than 60 items....
	Pipe Plug for Solid Plug Assembly	Pipe Plug for Solid Plug Assembly...
Lubricant-Synthetic	Lubricant-Synthetic	Gives maximum resistance to washout; best use is in light hydrocarbon liquids; provides superior protection to both metals and seals....
	Protective Cover Without Hole-Carbon Steel	The Protective Cover Without Hole is normally used with corrosion monitoring devices which rely upon retrieval and visual inspection for recording. ...
Lubriplate Grease	Lubriplate Grease	A multi-purpose lithium base grease. Usually the best choice of most services since it is thin and applies easily. ...
	Protective Cover With Hole - Carbon Steel	The Protective Cover With Hole accomodates probe inserts and their adapter/sensorsto permit continuous monitoring and automatic read-out instruments. ...
	Hot Tap Cutter w/Pilot Drill	Provides 100% plug retention...

Displaying 1 to 20 (of 32 products)

Result Pages: 1 2 [Next >>]