Corrater® Internal Corrosion Monitoring Devices

Click to enlarge

RCS offers a full range of advanced LPR corrosion rate monitoring instruments, including compact portables that offer economy, flexibility, and portability that make them an essential pocket instrument for every water treatment engineer. Corrosion data is captured in moments, from Corrater probes installed continuously in each system. The economical Model 9000 Plus is ideal for normal conductivity waters, and the AquaMateTM with SRC for an extended operating range. Both provide low-cost manual monitoring for systems with relatively stable corrosion.

Corrosion control is a main consideration to your processes. Contact Rohrback Cosasco today about implementing a corrosion monitoring system.

	Product Name	Product Description
	9000 Plus Portable CORRATER® Corrosion Rate Instrument ( 1 product )	The 9000 Plus portable CORRATER® instrument is your answer to quick and easy corrosion rate measurements in water systems, automatically. Simply plug the hand-held, light weight instrument into a CORRATER probe and press the “READ PROBE” key. After t...
	AquaMate® Portable CORRATER® LPR Corrosion Rate Instrument ( 1 product )	The AquaMateTM is your best answer to the problem of getting quick and easy corrosion rate measurements in water systems. Simply plug the hand-held instrument into a CORRATER® probe and press the measure key. In a few minutes the readout will displ...
	SCA-1/SCA-1L Single Channel CORRATER® LPR Corrosion Rate Instrument ( 22 products )	The SCA-1/1L is a single range field mountable CORRATER® instrument for continuous corrosion monitoring of water systems. The instrument is particularly suited to on-line monitoring applications where chemical treatment is being employed and compli...
	9030 Plus® CORRATER® LPR Corrsion Rate Instrument ( 5 products )	The 9030 Plus Instrument is a corrosion rate system designed for cooling water, process water, and feed water systems. It is available with one or two channels of corrosion rate, imbalance, and temperature data for rapid response to process upset condi...
	9020 CORRATER® LPR Continuous Corrosion Rate Transmitter ( 2 products )	The Model 9020 CORRATER® Transmitter is ideal for accurately monitoring corrosion rate in water systems ranging from high conductivity cooling water and seawater to low conductivity condensates. Power is supplied to the transmitter and the corrosion rate...
	E9020 CORRATER® On-Line LPR Corrosion Rate Transmitter ( 1 product )	The E-9020 digital transmitter is designed for on-line corrosion monitoring of water systems in electrically hazardous areas, and is compatible with the same communication bus as the Microcor technology. This makes it ideal for refineries, chemical plants...
	CORRDATA® Remote Data Collection System-Remote Data Collectors	Remote Data Collectors (RDC’s) are used at every probe location where maximum visibility and sensitivity to corrosion rate changes are required. Readings of corrosion and temperature data may be set as frequently as every five minutes for RDC-COT...
	CORRDATA® Remote Data Collection System-Data Transfer Units	Programming of all the RDC's, and data retrieval from the RDC's is accomplished by a single Checkmate™ DL or Mate II for direct transfer to a portable or desktop P.C. running CORRDATA ® Plus Software. For non-intrinsically safe applications the RDC m...
	CORRDATA® Software	CORRDATA® Plus Corrosion Management Software integrates data from the complete range of CORRDATA® Corrosion Management Hardware. The program provides for multiple sites and groups within those sites all in one program. Other users on the network can ma...
	CORRDATA® Remote Communication and Power Options ( 7 products )	A wide range of options are available to further extend the flexibility of the CORRDATA® system, and provide for even more automated data collection. These options start from a simple safety barrier that may be used with a 24VDC supply for a permanent po...
	9134X / 9134W 4-Channel CORRATER® Probe Interface Module ( 6 products )	The Model 9134X or 9134W CORRATER® Probe Interface Module (PIM) is the front end interface for use with CORRATER® Probes in dedicated continuous on-line ICMS™ Corrosion Monitoring systems. An explosion proof enclosure allows the unit to be mounted in ...
	CorrDATS™ 4 Corrosion & Deposit Monitoring System ( 25 products )	Rohrback Cosasco Systems and Bridger Scientific have collaborated to produce the new Rohrback Cosasco Systems CorrDATS™4 integrated corrosion and deposit monitoring system. The newly designed control unit provides stand-alone operation with ...
	Microcor®/Corrater® On-Line Systems Intelligent Interface Unit (IIU)	The Intelligent Interface Unit is designed for use on small to medium size Microcor and E-9020 Corrater online systems for easy integration into existing SCADA and DCS systems. The IIU is normally supplied as part of a complete corrosion management syste...
	COSASCO Side-Stream Assembly	Rohrback Cosasco Systems new side-stream monitor provides a simple, portable and flexible survey tool that can be rapidly deployed to provide metal loss, corrosion rate, erosion rate, pressure, temperature, flow and bacterial activity according to your...

Displaying 1 to 14 (of 14 products)

Result Pages: 1