RDC-CI Chemical Injection Data Logger

The new RDC-CI Chemical Injection Data Logger has been designed to complement our existing range of Microcor® and Corrdata® corrosion monitoring data loggers. The main purpose of a corrosion monitoring data logger is to check that the correct chemical injection rate is being applied and working properly. Chemical over-treatment can be expensive especially with corrosion prevention chemicals, and under-treatment can be catastrophic and even more costly. It is all too easy, particularly in remote locations, to have problems with chemical injection from low tank levels, pump failures, vapor lock in high temperature situations, and more. In addition, the typical low flow injection rates of chemical additives can be difficult to measure and maintain accurately. The battery operated RDC-CI attaches to the discharge side of the chemical injection pump to provide the most accurate data on exactly how much chemical is actually entering the system at any given time; and storing the data in a Remote Data Collector for easy data retrieval.

Click here to view the RDC-CI Chemical Injection Data Logger Brochure

RDC-CI Chemical Injection Data Logger Datasheet

RDC-CI Chemical Injection Data Logger User Manual

Features

Improve your Chemical Cost Management Efficiency
Ensure Correct Injection Rates are always maintained
Battery operated for easy installation in Remote Locations
Exceptional Wide Operating Range from 0.5 to 100 gallons per day
Use with Wide Variety of Chemicals
Wide Operating Temperature – 40C to +70C
Simple Data Transfer
Software included
Operation in Hazardous Areas (in development)

Mounted on discharge side of the chemical injection pump, the RDC-CI Chemical Injection Data Logger directly monitors the flow to the chemical injection quills or nozzles with its accurate positive displacement flow meter designed to continuously check the actual amount of chemical leaving the pump and entering the system. The RDC-CI can be permanently piped in for continuous monitoring or piped in on a temporary basis with our accessory kit of flexible 6 ft hoses and sealing quick-connect couplings, to allow for occasional in-line testing. Every 5/10,000 ^th gallon volume increment is measured and totalized into selectable interval “buckets” between 2 min and 1 day over which the injection rate is computed. The battery life is typically 6 months. Collected data can be transferred directly to a laptop if located in a safe area, or with a Checkmate DL or Checkmate Plus in a hazardous area. Data is stored in a CSV file format and can be viewed graphically as flow rate and integrated flow on the supplied software. A hazardous area location version is currently in development.

RDC-CI Data Logger

Rev-C

Please use the following product selector to assist you in selecting the appropriate product options and instrument model to meet your needs. If you are unsure of a particular option just choose “unknown” from the drop down menu. Please note all length requirements are in “inches”.

Chemical Injection Data-Logger Ordering Information



Max Pressure Rating

Injection Pump Seals

Accessories

Part Number:

	Quantity:

The RDC-CI Data Logger is designed for use anywhere corrosion inhibitors or other chemical additives are being injected into oil, gas, or water systems for maintenance, process efficiency or as part of the process method itself. The most common applications are:

Remote Well Locations
Refineries
Gas Plants
Offshore Platforms
Oil Production and Separation Plants
Waterflood Systems
Pipelines
Industrial Water Cooling Systems
Water Treatment Systems

Key benefits of the RDC-CI Chemical Injection Data Logger

Ensures continuous and cost-effective chemical injection
Accurate chemical flow monitoring
User-adjustable graphical analysis software included
Suitable for a wide variety of applications and chemicals
Battery operated for quick installation in remote locations
Easy to use
Data easily imported for use in other programs such as Microsoft^® Excel